Installation
Instructions
Zoneline Air
Conditioners
I Questions? cull 800.GE.CARES (800.432.2737) or visit our Website at:GEAppliunces.com I
BEFORE YOU BEGIN
Read these instructions completely and carefully.
• IMPORTANT - Sovetheseinstructionsfor
Io¢oiinspector'suse
•IMPORTANT -Observeo,,governing
codes ond ordinonces
• Note to Installer- Be sure to leovethese
instructionswiththe owner
• Note to Owner - Keep these instructionsfor
futurereference
• Proper instollotionisthe responsibilityof the instolier
• Product foiluredue to improper instollotionisnot
covered under the Worronty
TOOLS YOU WILL NEED
Phillipsscrewdriver
IMPORTANTELECTRICAL
SAFETY-READ CAREFULLY
-_ CAUTION:
Follow the National Electrical Code (NEC)or local
codes and ordinances.
For personal safety, this Zoneline must be properly
grounded.
Protective devices (fuses or circuit breakers)
acceptable for Zoneline installations are specified
on the nameplate of each unit.
Do not use an extension cord with this unit.
Aluminum building wiring may present special
problems-consult a qualified electrician.
When the unit is in the OFF position, there is
still voltage to the electrical controls.
Disconnect the power to the unit before
servicing by:
1 Removing the power cord (if it has one) from
the wall receptacle.
OR
2 Removing the branch circuit fuses or turning
the circuit breakers off at the panel.
ZONELINE COMPONENTS
Appearance may vary.
unit
Exteriorgrille/louver_ 3
Wall case_J
Shippedwith the Zonelineunit
_ Checkthe "EssentialElements"list onthe unitlocatedonfront of the basepan
-Power supplykit_
11
To Next Page
Loading...
