To Next Page

To Previous Page

GE Multilin B30 Bus Differential System 1-13

1 GETTING STARTED 1.3 ENERVISTA UR SETUP SOFTWARE

C:\WINNT>ipconfig

Windows IP Configuration

Ethernet adapter <F4FE223E-5EB6-4BFB-9E34-1BD7BE7F59FF>:

Connection-specific DNS suffix. . :

IP Address. . . . . . . . . . . . : 0.0.0.0

Subnet Mask . . . . . . . . . . . : 0.0.0.0

Default Gateway . . . . . . . . . :

Ethernet adapter Local Area Connection:

Connection-specific DNS suffix . :

IP Address. . . . . . . . . . . . : 1.1.1.2

Subnet Mask . . . . . . . . . . . : 255.0.0.0

Default Gateway . . . . . . . . . :

C:\WINNT>

Before using the Quick Connect feature through the Ethernet port, disable any configured proxy settings in Internet

Explorer.

1. Start the Internet Explorer software.

2. Select the Tools > Internet Options menu item and click the Connections tab.

3. Click on the LAN Settings button to open the following window.

4. Ensure that the “Use a proxy server for your LAN” box is not checked.

If this computer is used to connect to the Internet, re-enable any proxy server settings after the computer has been discon-

nected from the B30 relay.

1. Start the Internet Explorer software.

2. Select the “UR” device from the EnerVista Launchpad to start EnerVista UR Setup.

3. Click the Quick Connect button to open the Quick Connect dialog box.

4. Select the Ethernet interface and enter the IP address assigned to the B30, then click the Connect button. The

EnerVista UR Setup software creates a site named “Quick Connect” with a corresponding device also named “Quick

Connect” and displays them at the upper-left of the screen.

GE b30 User Manual

Other manuals for GE b30