B-106 B30 Bus Differential System GE Multilin
B.4 MEMORY MAPPING APPENDIX B
B
F618
BITFIED: SECURITY STATUS INDICATOR
Has been activated, whether the password has been set.
1 = Bit#0, Administrator password was set. The list is continued for
all other roles (Engineer = bit#2, Operator = bit#3, Observer =
bit#3).
F619
ENUMERATION: RADIUS AUTHENTICATION METHOD
0 = EAP-TTLS
F621
ENUMERATION: MODBUS LOGIN ROLES
x
F623
ENUMERATION: REAL-TIME CLOCK SYNCHRONIZING
SOURCE CONFIGURATION
F624
ENUMERATION: REAL-TIME CLOCK SYNCHRONZING
SOURCE ACTUALS
F625
ENUMERATION: PTP STATE
F626
ENUMERATION: NETWORK PORT FOR REMOTE DEVICE
F627
ENUMERATION: REDUNDANCY MODE
F628
ENUMERATION: SECURITY BYPASS ACCESS
Disables security on local access, remote access, or both.
F629
ENUMERATION: SCADA PROTOCOL
0 = DNP 3.0, 1 = IEC 60870-5-104, 2 = IEC 60870-5-103
F630
ENUMERATION: IEC 103 ASDU TYPE
0 = 3, 1 = 9
F631
ENUMERATION: VIRTUAL INPUTS FOR IEC 103
Enumeration Role
0None
1 Administrator
2 Supervisor
3 Engineer
4 Operator
5 Observer
Enumeration Item
0None
1 PP/IRIG-B/PTP/SNTP
2 IRIG-B/PP/PTP/SNTP
3 PP/PTP/IRIG-B/SNTP
Enumeration Item
0None
1 Port 1 PTP Clock
2 Port 2 PTP Clock
3 Port 3 PTP Clock
4IRIG-B
5SNTP
Enumeration Item
0Disabled
1 No Signal
2 Calibrating
3 Synchronized
4 Synchronized (No PDelay)
Enumeration Item
0None
1Network Port 1
2Network Port 2
3Network Port 3
Enumeration Item
0None
1 Failover
2PRP
Enumeration Item
0 Disabled
1 Local and Remote
2 Local
3Remote
Enumeration Item
0OFF
1 Virtual Input 1
2 Virtual Input 2
3 Virtual Input 3
↓↓
64 Virtual Input 64
To Next Page
Loading...
Need help?
General
