EasyManua.ls Logo

GE Bently Nevada 3500/15 Series - Page 3

GE Bently Nevada 3500/15 Series
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Additional Information
Notice:
This manual does not contain all the information required to operate and maintain
the product. Refer to the following manuals for other required information.
3500 Monitoring System Rack Installation and Maintenance Manual (Part
Number 129766-01)
General description of a standard system
General description of a Triple Modular redundant (TMR) system
Instructions for installing and removing the module from a 3500 rack
Drawings for all cables used in the 3500 Monitoring System
3500 Monitoring System Rack Configuration and Utilities Guide (Part
Number 129777-01)
Guidelines for using the 3500 Rack Configuration software for setting the
operating parameters of the module
Guidelines for using the 3500 test utilities to verify that the input and output
terminals on the module are operating properly
3500 Monitoring System Computer Hardware and Software Manual (Part
Number 128158-01)
Instructions for connecting the rack to a 3500 host computer
Procedures for verifying communication
Procedures for installing software
Guidelines for using Data Acquisition / DDE Server and Operator Display
Software
Procedures and diagrams for setting up network and remote communications
3500 Field Wiring Diagram Package (Part Number 130432-01)
Diagrams that show how to hook up a particular transducer
Lists of recommended wiring
iii

Related product manuals