5. Turn the BiliSoft box on.
6. Insert the fiberoptic cable in the box.
IMPORTANT:
For hygienic purposes, never place a baby directly on the bare fiberoptic light pad. The
light pad must be covered with the BiliSoft Pad Cover or BiliSoft Nest as described above. BiliSoft
Pad Covers and BiliSoft Nests are for single-patient use only. The BiliSoft Pad Cover or BiliSoft Nest
must be changed between patients and whenever it is soiled. Follow all local and national
regulations for disposing of this type of product.
WARNING:
The light is intended to shine through the padded surface of the BiliSoft Pad
Cover or BiliSoft Nest. If the BiliSoft Pad Cover or BiliSoft Nest is installed
incorrectly and light shines through the unpadded side, the light intensity will be
higher.
M1110147 Rev. 5 © 2007 Datex-Ohmeda. All rights reserved. 5-7
To Next Page
Loading...
Need help?
General
