BiliSoft Fiberoptic Light Pad Assembly
The fiberoptic light pad comes in two sizes – large and small. The LED light source in the
BiliSoft light box is focused on the fiberoptic lenses at the end of the fiberoptic cable
connector. The fiberoptic cable contains plastic fibers that transmit light from the light box to
the light pad. The light pad is constructed of these plastic fibers woven into a mat. This
patented process produces a light pad that emits light over its entire surface. Average light
intensity depends on the size of the light pad. See Chapter 9 for detailed specifications.
Component/Control
1. Fiberoptic light pad
2. Fiberoptic cable connector
3. Fiberoptic lenses
4. Fiberoptic cable
Warning:
Never place a baby directly on the bare fiberoptic light pad. The fiberoptic
light pad should always be covered with a BiliSoft Pad Cover or BiliSoft Nest
when used with the patient.
M1110147 Rev. 5 © 2007 Datex-Ohmeda. All rights reserved. 4-3
To Next Page
Loading...
