GE C1033 - Basic Operation; Shooting in Auto Mode; Using the Zoom Function

14 15
Setting Date/Time and Language
To set the language, date, and time, go to the following setup
options in the Setup menu.
• Date / Time
• Language
To access the Setup menu, do the following:
1. Press
Power to turn the camera on.
2. Press the button, switch among the setting menus by
using the Left/Right button to select the corresponding
basic setting menu.
3. Press the button to conrm the setting.
Setting the Date and Time
1. Use the
Up/Down button to select Date/Time. Then
press the Right button to enter the setting.
2. Press the
Left/Right to highlight each field and use the
Up/Down to adjust the value.
3. Press the
button to conrm the setting.