GE C1033 - Beep; LCD Brightness

52 5353
Beep
Use this setting to adjust the volume of beep when buttons are
pressed and change the tones for Shutter button, self-timer,
and power-on/power-o.
To change this setting:
1. Select the
Beep setting from the Setup menu as described
previously.
2. Use the
Up/Down navigation buttons to switch between
volume, shutter tone, key tone, self-timer tone, and power
tone elds.
3. Press the Right button, press the Up/Down button to
adjust volume and change tone, and press the button
to conrm setting.
LCD Brightness
Use this setting to adjust the brightness of your LCD screen.
1. Select the
LCD Brightness setting from the Setup menu
as described previously.
2. Select auto or adjust the brightness level using the
Left/Right button, and press the button to conrm the
setting.