GE C1440W - Setting Language and Date;Time; USING THE MODES; Display and Screen Settings

12 1312 13
Setting Language and Date/Time
The Date/Time and Language setup page will
automatically appear when the camera is turned on for
the rst time.
To set the display language and date/time, go to the following
setup options in the General Setup Menu.
• Language
• Date/Time
To access the General Setup Menu, follow the steps below:
1.
Press the Power button to turn the camera on.
2.
Press the
func
menu
button, press Up/Down button to switch
between menus, select Set Menu, press
SET
button to enter
Set Menu.
Set Display Language
1.
In the General Setup Menu, press Up/Down button to
select Language, press
SET
or Right button to enter setting
mode.
2.
Use the Up/Down/Left/Right buttons to select the desired
language.
3.
Press the
SET
button to conrm the setting.