GE C1440W - Video System

60 61
60 61
Video System
Use this feature to switch the video system from either NTSC
or PAL.
1. Select Video System in the Transmission menu, then
press Right.
2. Use the Up/Down navigation buttons to select NTSC or
PAL. Then press the
SET
button to conrm.
The video output signal can be switched to NTSC or PAL
to accommodate dierent regional TV standards. The
appropriate setting will vary between regions.
NTSC: USA, Canada, Taiwan, Japan, etc.
P
AL: Europe, Asia (excluding Taiwan), Oceania, etc.
Not
e: The TV output will not display properly if an
incorrect video system is selected.