5-14 C60 Breaker Protection System GE Multilin
5.2 PRODUCT SETUP 5 SETTINGS
5
The table outlines access rights.
4. Click OK to add the user account to the security management system.
MODIFYING USER PRIVILEGES
The following pre-requisites are required to modify user privileges in the EnerVista security management system:
• The user modifying the privileges must have administrator rights
• The EnerVista security management system must be enabled
To modify user privileges:
1. Select the Security > User Management menu item to open the user management window.
2. Locate the username in the User field.
3. Modify the user access rights by enabling or disabling one or more of the check boxes.
The table outlines access rights.
Table 5–1: ACCESS RIGHTS SUMMARY
FIELD DESCRIPTION
Delete Entry Deletes the user account when exiting the user management window
Actual Values Allows the user to read actual values
Settings Allows the user to read setting values
Commands Allows the user to execute commands
Event Recorder Allows the user to use the digital fault recorder
FlexLogic Allows the user to read FlexLogic values
Update Info Allows the user to write to any function to which they have read privileges. When any of the Settings, Event
Recorder, and FlexLogic check boxes are enabled by themselves, the user is granted read access. When
any of them are enabled in conjunction with the Update Info box, they are granted read and write access.
The user is not granted write access to functions that are not checked, even if the Update Info field is
checked.
Admin The user is an EnerVista UR Setup administrator, therefore receiving all of the administrative rights.
Exercise caution when granting administrator rights.
Table 5–2: ACCESS RIGHTS SUMMARY
FIELD DESCRIPTION
Delete Entry Deletes the user account when exiting the user management window
Actual Values Allows the user to read actual values
Settings Allows the user to read setting values
Commands Allows the user to execute commands
To Next Page
Loading...
Need help?
General
