GE CARESCAPE ONE - Profiles

9
Proles
When you start monitoring a patient, you can use the startup prole or select another prole. According to the
conguration, your software may have up to eight proles to choose from. Proles control many settings, including
parameter defaults, alarm detection limits, and alarm functionality.
1. Select the patient information
area on the screen.
2. Select the Patient tab.
3. Select a prole from the
Prole list.
If you make changes to a prole
while using it and need to return
to its previous settings, rst select
another prole and then re-select
the one you were using. If only one
prole has been enabled during
conguration, return to saved prole
settings through patient discharge/
case end or device reset.
If a prole other than the startup
menu has been selected during
the monitoring session, upon
discharge the CS ONE will return
to the startup prole for the next
monitoring session.
3
2 1