16
CARESCAPE CO
2
Measurement
Equipment Connection with CARESCAPE CO
2
For intubated and non-intubated patients.
• Connect the LoFlo Sidestream Module to CARESCAPE CO
2
.
• Connect CARESCAPE CO
2
to the CS ONE.
• Connect the sample line to the LoFlo Sidestream Module.
• When the LoFlo Sidestream module is connected it will zero
and go through a warm-up procedure automatically.
1. CARESCAPE ONE
2. CARESCAPE CO
2
3. Exhaust port
4. LoFlo Sidestream Module
5. Accessories, i.e. sample lines,
nasal cannulas, etc.
About Sidestream
Sidestream kits are intended for monitoring CO
2
of intubated and
non-intubated patients. Following are things to consider when
selecting a sidestream kit for a non-intubated patient.
• Select the kit that has the best t
and most comfort for the patient.
For example, the kit labeled as
Pediatric may have the best t
and be more comfortable on a
small-statured adult than the
adult cannula kit. The cannula kit
are equally functional regardless
of which is used.
• Verify that the cannula kit is
clean, dry and undamaged.
Replace the cannula kit , if
necessary.
• Insert the sample cell into the
sample cell receptacle. You will
hear a click when the sample cell
is properly inserted.
• When the LoFlo Sidestream
module is connected it will
zero and go through a warm-up
procedure automatically.
• Place the nasal cannula kit onto
the patient.
1
2
3
4
5
1
2
3
To Next Page
Loading...
