GE CARESCAPE ONE - Resetting a Case; Discharging a Patient

12
Resetting a Case / Discharging a Patient
Resetting a case/discharging a patient deletes all patient information and returns the monitor to the dened
startup prole.
All settings, including alarm limits return to their default values. All patient data is removed from the monitor.
The CS ONE may be congured in care unit settings with an automatic case reset/patient discharge timer. Care unit
settings are password protected. If an automatic case reset/patient discharge is congured and there are no active
parameters and no use of the touchscreen, monitoring will end automatically after the congured time has elapsed.
1. Disconnect patient cables.
2. Select the patient information
area on the screen.
3. Select the Discharge / Reset
Case tab.
4. Select Conrm.
4
3 2