GE Carestation 750 - Starting Manual Ventilation; Starting Mechanical Ventilation

25
Starting manual ventilation
1. Connect a manual breathing circuit.
2. Make sure the APL valve is set to a clinically
appropriate value.
3. Set the Bag/Vent switch to Bag.
Starting mechanical ventilation
1. Set the ACGO switch to the circle
circuit position.
2. Set the Bag/Vent switch.
If Bag/Vent switch is set to Bag,
move to Vent position to start
mechanical ventilation.
3. If needed, push the O
2
ush button
to inate the bellows.
2
3
1
1
2
3