Hardware Installation IST 007 Adaptec SCSI Card Installation
Page 53
n IST 007 Adaptec SCSI Card Installation
Section 1: Introduction
This job card describes how to install an Adaptec SCSI controller card in the Centricity RA600
Workstation computer.
Section 2: Tools REquired
u
5 mm cross-head screwdriver
u
5 mm flat-head screwdriver
u
Grounding wristband
Section 3: Materials Required
u
Adaptec AHA-2930U SCSI Card
u
50-Pin SCSI Interface Cable
Section 4: Prerequisites
u
Centricity RA600 Workstation with Windows 2000 Pro installed per GEMS specification.
Section 5: Procedure
To Next Page
Loading...