Configuration
The system consists of:
1 The CRxVision with
Optional input table / output table (each 43 cm) with light protection cover.
Optional input / output table (150 cm)
2 Image plates - following types are available:
IPU for CRxVision
IPS for CRxVision
IPS2 for CRxVision
IPC2 for CRxVision
3 Workstation for image processing and identification.
1
2
3
The data transmission is performed via network.
Two configurations are possible:
1 Via local network
2 Via point-to-point network connection
1
2
CRxVision Operating Manual V1.2 11
To Next Page
