GE DIGITAL CAMERA J1470S - Connecting to a PictBridge Compatible Printer; Setting the USB mode

65
FW Version (Firmware Version)
Use this setting to view and update the current camera
rmware version.
1. Select the
FW Version in File and Software menu.
2. The screen will show the current rmware version. If there
is a memory card with a rmware le, the camera will
detect it and ask if you want to update the rmware.
To update to the latest rmware version, you can go to
the following website:www.ge.com/digitalcameras and
look under Support.
Reset Settings
Use this setting to restore the camera to its default settings.
1. Select the Reset setting in File and Software menu.
2. Use the Up/Down navigation buttons to select Yes or No.
Then press the button to conrm.