Druck DPI 620
advanced modular calibrator
safety and quick reference guide - K0454
GE
Sensing & Inspection Technologies
A1.1 DPI 620: Channel 1 (CH1)
Measure (M) / Source (S) / Power (P)
a ±30 V (M)
b 0 to 12 V (S)
c
±2000 mV (M)
0 to 2000 mV (S)
Figure C1
Note: = See figure or
table.
d 0 to 4000 Ω (M/S)
e 0 to 50 kHz (M/S)
f
Switch (M)
g ±55 mA (M)
Figure C2
h 0 to 24 mA (S)
i 11 RTDs (M/S) Figure C3 (2, 3, 4-wire)
j 12 TCs (M/S) Figure C4
k ±300 Vac: AC probe Figure C5 (Part: IO620-AC)
A1.2 DPI 620: Channel 2 (CH2)
l ±30 V (M)
m ±2000 mV (M)
n ±55 mA (M)
Figure D1
o 0 to 24 mA (S)
p 24 V loop (P)
q
Switch (M)
A1.3 DPI 620 + MC 620 + PM 620
Pressure* (M) Figure E1
Gauge: 25 mbar to 200 bar (0.36 to 3000 psi)
Absolute: 350 mbar to 1000 bar (5 to 15000 psi)
Note: Maximum pneumatic pressure: 500 bar (7250 psi)
*Caution: To prevent damage to the PM 620 module, only
use it within the specified pressure limit on the label.
© 2008 General Electric Company. All rights reserved.
Trademarks
All product names are trademarks of their respective companies.
To Next Page
