[EN] English - K0454 Issue 1 3
1Overview The advanced modular calibrator (AMC) is part of a set of
hand-held modules that you can quickly put together to include
a wide range of calibrator functions.
Advanced modular calibrator, DPI 620: This is a
battery-powered instrument for electrical measure and source
operations and HART® communications; see table A1(front
cover). It also supplies the power and user interface functions
for all the add-on modules. You can use the touch-screen to
display up to six different parameters.
Pressure module carrier, MC 620: Optional item. This
attaches to the DPI 620 calibrator to make a fully integrated
pressure indicator instrument. To measure and display
pneumatic or hydraulic pressures, you can have up to two
interchangeable pressure transducers at a time.
Pressure modules, PM 620: Optional item. These modules
attach to the pressure module carrier (MC 620) or to a pressure
station (PV 62x) to give the DPI 620 calibrator the necessary
pressure measurement functionality. They are fully
interchangeable “plug and play” modules with no initial set-up
or user calibration.
Pressure stations, PV 62x: Optional item. To make a fully
integrated pressure calibrator, you can attach the DPI 620
calibrator to one of the three pressure stations. Refer to user
manual - K0457.
2 Standard
equipment
These items are part of the standard equipment with the
DPI 620 calibrator:
• DC power supply/battery charger unit
• Li-Polymer battery
• Set of six electrical test leads
• Safety and quick reference guide
• CD with the user manual
To Next Page
Loading...
