GE Druck DPI 740

K0200 Issue No. 1
5 8 DP I 7 4 0 U s e r M a n u a l
Protocol format commands
Command: FC - Enable/disable message
checksum
Format: FC=<flag>
Description: Format checksum command. Enables/
disables the checksum feature of the data
transactions.
<flag> = 0 disable checksum feature
1 enable checksum feature
Example: FC = 0 disable checksum feature
FC = 1 enable checksum feature
Query: There is no corresponding query command.
Command: FA - Enable/disable addressed
mode
Format: FA=<flag>
Description: Format addressing mode command.
Enables/disables the addressed mode
feature of the data transactions. When
addressed mode is disabled, one to one
communication (direct mode) is assumed.
<flag> = 0 disable addressed mode
1 enable addressed mode
Example: FA = 0 disable addressed mode
FA = 1 enable addressed mode
Query: There is no corresponding query command.