GE E1450W - Reset Settings; FW Version (Firmware Version)

6464 65
FW Version (Firmware Version)
Use this setting to view the camera's rmware version.
1. Select FW Version in the File / Software menu.
2.
If you have uploaded the latest rmware version to your
SD card, upgrade accordingly as necessary.
To update to the latest rmware version, you can go to
the following website: www.ge.com/digitalcameras and
look under Support.
Reset Settings
Use this setting to restore the camera to its default settings.
1. Select Reset Settings in the File / Software menu page and
press the or Right button.
2. Use the Up/Down navigation buttons to select Yes or No.
Then press the
button to conrm.