GE E1450W - Transmission and Connectivity

64 65
Video System
Transmission
The video output signal can be switched to NTSC or PAL to
accommodate dierent regional standards. The appropriate
setting will vary between regions.
NTSC: USA, Canada, Taiwan, Japan, etc.
P
AL: Europe, Asia (excluding Taiwan), Oceania, etc.
Note: The TV output will not perform properly if an
incorrect video system is selected.
Use this setting to congure your video system to your current
area.
1.
Select Video System in the Transmission menu.
2. Use the Up/Down navigation buttons to select NTSC or
PAL. Then press the button to conrm.