GE E1486TW - Connecting to the PC

72 7372 73
Reset Setting
Use this option to restore the camera to the factory default
settings.
1.
In the camera setting menu, select Reset Settings.
2.
Select Yes or No. Press the button to conrm.
FW Version
Use this setting to view or update the current rmware ver-
sion of the camera.
1. In the Camera Setting menu, select the FW Version.
2. When no new rmware version is found in the SD card, the
screen shows the current camera rmware version of the
camera.
3. When a new rmware version is found in the SD card,
select Yes to continue the update (or No to cancel). Press
the button to conrm.
When there is only one bar of battery remaining, you
will not be able to update the camera's rmware