76 7776 77
4. Connect the other end of the cable to an available USB port
on your PC.
5. Disconnect the cable after the transfer is complete.
If the USB option is set to [PC] :
Turn o the camera and disconnect the USB Cable.
If the USB option is set to [PC (PTP)] :
Remove the camera from the system as described below
before turning o the camera and disconnecting the USB
cable.
Windows operating system (Windows 2000, Windows XP,
Windows Vista, Windows 7.)
Click the [Safely remove the hardware] icon and remove
the USB connector according to the appeared menu.
Macintosh
Drag the untitled icon to the Trash. ("Untitled")
To Next Page
Loading...
