GE GTD75GCPLDG Installation Instructions

Installation Instructions
5
TOOLS YOU WILL NEED
CONNECTING A GAS DRYER (skip for electric dryers)
• Before beginning the installation, turn off
the circuit breaker(s) or remove the dryer’s circuit
fuse(s) at the electrical box. Be sure the dryer cord
is unplugged from the wall.
• Turn the dryer’s gas shut-off valve in the supply
line to the OFF position.
• Disconnect and discard old flexible gas connector
and ducting material.
Shut-off
Valve
MATERIALS YOU WILL NEED
 10” Adjustable
wrenches (2)

8” Pipe wrench

Flat-blade
screwdriver

Level

Slip-joint pliers
 4” dia. metal elbow

Pipe compound or
PTFE tape

Flexible gas line
connector

Duct clamps (2) or
Spring clamps (2)

Safety glasses

4” dia. metal duct
(recommended)

4” Cover Plate (Kit
WE49X22606)

4” dia., UL-listed
flexible metal duct
(if needed)

Gloves

Soap solution for
leak detection

Exhaust hood

Duct tape

Gas pipe adapters (2),
elbow and pipe plug

GE GTD75GCPLDG Specifications

General

Color	gray, diamond gray
Dryer Capactity	7.4 cubic feet
Number of Cycles	14
Cycle Selections	antibacterial, bulky items, damp dry, dewrinkle, extended tumble, jeans, mixed load, quick fluff, sanitize, steam dewrinkle, steam refresh, towels/ sheets
Options	edry, extended tumble, my cycle, delay dry, volume, damp alert
Stackable	no
Venting	no
Temperature Settings	5
Temperature Selections	high, medium, low, extra low, no heat
Temperature Control	no
Delay Start	yes
Child Lock	no
Cycle Signal	yes
Moisture Sensor Option	yes
Steam	yes
Smart Home	yes

Weight and Dimensions

Depth	30 1/2 inches
Height	48 inches
Width	27 inches