3-10 PACSystems* RX3i PROFINET Controller Manual – December 2011 GFK-2571A
Configuring PROFINET LANs
To view the LANs in the project, click on Tools In the Machine Edition toolbar, and select LAN View
from the menu. If no LANS and no PNCs have been added to the project, the LAN View is empty:
Adding a PNC to the project automatically creates a new LAN.
Expand the LAN icon in the LAN View to see the modules it includes.
A LAN can also be added to the project by right-clicking on the PROFINET icon in the LAN View and
selecting Add LAN.
To Next Page
Loading...
