3-22 PACSystems* RX3i PROFINET Controller Manual – December 2011 GFK-2571A
Adding a Third-Party IO-Device to a LAN
To add a third-party IO-Device to a LAN, in the Navigator right-click on an IC695PNC001 module
and select Add IO-Device. Choose the module type and click Have GSDML:
All third-party IO-Devices require GSDML files to be included in the system configuration. The
GSDML file for the device must be present on the computer being used for the configuration.
Provide a path to the file and click OK. The device is added to the configuration. Machine Edition
extracts necessary parameters from the GSDML file and makes the data available for editing within
Machine Edition.
To Next Page
Loading...
