GFK-2571A Chapter 3 Configuration 3-29
indicates that the actual Device’s Name does not match any configured Device residing on
the selected LAN. Either there is no device name configured in the system, or that name is on a
different LAN.
If the name of the device on the network is not correct, and you must therefore update the device
name, select the device in the list of devices, and click Edit Device. This will open a new dialog that
can be used to set various parameters, including device name, directly on the device. Note: Only
the device name is required to match configuration in order for the PNC to successfully deliver
configuration to the device.
To Next Page
Loading...
