To Next PageTo Next PageHow to fix a crooked oven door on GE Ranges?
If the oven door on your GE Ranges is crooked, it may be out of position, especially after installation. To straighten it, push down on the high corner.
Why does my GE JB258 Ranges control signal after entering cooking time or start time?
If your GE range control signals after entering cooking or start time, it means you forgot to enter a bake temperature or cleaning time. Touch the Bake pad and the desired temperature, or the Self Clean pad and the desired clean time.
Why does "LOCK DOOR" flash on my GE Ranges display?
If "LOCK DOOR" is flashing on the display of your GE Ranges, it means the self-clean cycle has been selected, but the oven door is not closed. Close the oven door to resolve this.
What to do if DOOR LOCK light is on when I want to cook on GE JB258 Ranges?
If the DOOR LOCK light is on when you want to cook on your GE Ranges, the oven door is locked because the temperature inside the oven hasn't dropped below the locking temperature. Press the Cancel/Off pad and allow the oven to cool down.
Why is there excessive smoking during the clean cycle of my GE JB258 Ranges oven?
If you notice excessive smoking during the clean cycle of your GE range, it's likely due to excessive soil or grease in the oven. To resolve this, press the Cancel/Off pad, open your windows to ventilate the room, and wait for the LOCKED light to turn off. Then, wipe up the excess soil and reset the clean cycle.
Why is my GE JB258 oven not clean after a clean cycle?
If your GE range oven isn't clean after running a clean cycle, it could be due to a couple of reasons. First, check the Cleaning the Oven section to ensure the oven controls were properly set. Also, if the oven was heavily soiled, make sure to clean up any major spills before starting the clean cycle. For heavily soiled ovens, you might need to run the self-clean cycle again or for a longer duration.
Why won't my GE Ranges oven self-clean?
If your GE range oven won't self-clean, it could be due to a couple of reasons. If the oven temperature is too high, it won't allow you to set a self-clean operation. Let the oven cool down and then reset the controls. Also, ensure the oven controls are properly set by referring to the Cleaning the Oven section.
What does it mean when “F— and a number or letter” flash in the display of my GE JB258 oven?
If you see “F— and a number or letter” flashing in the display of your GE range, it indicates a function error code. First, press the Cancel/Off pad and let the oven cool down for one hour before trying to use it again. If the error code reappears, disconnect power to the oven for at least 30 seconds, then reconnect it. If the function error code continues to repeat, it's best to call for service.
Why is there excessive smoking during broiling in my GE JB258 Ranges oven?
If you're experiencing excessive smoking while broiling in your GE range, it's likely because the food is positioned too close to the burner element. To reduce the smoking, simply lower the rack position of the food.
Why is the oven temperature too hot or too cold in my GE JB258?
If the oven temperature in your GE range is too hot or too cold, it likely needs adjustment. Refer to the Special Features section or adjust the thermostat if your model has an oven temperature knob.
Crucial safety measure to prevent range tipping and potential injury.
Essential guidelines for safe operation and user protection.
Warnings against storing flammable items near the appliance.
Steps to take in case of a fire to prevent injury and spread.
Specific safety precautions for using the cooktop surface units.
Safety guidelines related to coil-type surface units and their components.
Precautions for safe operation of the oven cavity and its elements.
Critical safety instructions for operating the self-cleaning feature.
Instructions for safely removing protective materials before use.
Guidance on environmentally safe disposal of the appliance.
How to operate and use the surface units safely and effectively.
Recommendations for cookware suitable for coil cooktops.
General guidelines for selecting and using cookware for optimal performance.
Specific advice for using the range for home canning procedures.
Explanation of the various oven control buttons and their functions.
How to calibrate the oven temperature for precise baking.
Details on auto shut-off and special Sabbath mode features.
Guidance on using oven racks and their recommended positions.
Precautions and guidelines for using foil or liners in the oven.
Description of different oven cooking modes like Bake and Broil.
Recommendations for food types, modes, rack positions, and suggestions.
Instructions for removing and cleaning the range control knobs.
Methods for cleaning the range's control panel safely.
Procedures for cleaning the exterior surfaces of the oven.
Guidelines for cleaning painted parts of the range.
Recommendations for cleaning and maintaining stainless steel surfaces.
Specific instructions for cleaning the porcelain enamel cooktop.
How to clean, remove, and replace surface units and drip pans.
Detailed steps for cleaning drip pans, including removal and cleaning methods.
Instructions for lifting the cooktop for easier cleaning and access.
Steps for manually cleaning the inside of the oven.
Guide to operating the self-cleaning cycle for the oven interior.
How to clean oven racks, especially after self-cleaning.
Information on cleaning oven heating elements and the oven floor.
Step-by-step guide for replacing the oven light bulb.
Instructions for safely removing and reinstalling the oven door.
Guide for removing and reinstalling the storage drawer.
Common problems and solutions for surface unit operation.
Troubleshooting tips for improper baking or broiling results.
Diagnosing issues with the oven not working or temperature inaccuracies.
Resolving common problems with the oven door and light.
Solutions for issues encountered during the self-clean cycle.
Addressing display errors, odors, and preheating issues.
Details on warranty service, what is covered, and what is not.
Specific conditions and damages not covered by the limited warranty.
Information on purchasing extended warranties and benefits.
List of available accessories, parts, and cleaning supplies.
Specific cleaning products recommended by the manufacturer.
Resources for online support, product registration, and website information.
How to schedule service, and information on extended warranty purchases.
Details on ordering parts, accessories, and general contact information.
General
