What to do if my GE Ranges oven door will not open after a clean cycle?
If your GE Ranges oven door won't open after a clean cycle, it's likely because the oven is still too hot. Allow the oven to cool down below the locking temperature before attempting to open the door.
Why is the 'DOOR LOCK' light on when I want to cook on my GE JB735SPSS?
If the 'DOOR LOCK' light is on when you want to cook on your GE Ranges, the oven door is locked because the temperature inside the oven has not dropped below the locking temperature. Press the Cancel/Off pad and allow the oven to cool.
Why is my GE Ranges oven not clean after a clean cycle?
If your GE Ranges oven isn't clean after running a clean cycle, ensure the oven controls were properly set, referring to the "Cleaning the Oven" section. Also, if the oven was heavily soiled, clean up any significant spills before starting the clean cycle. For heavily soiled ovens, you might need to run the self-clean cycle again or for a longer duration.
Why is there a 'burning' or 'oily' odor emitting from the vent of my GE JB735SPSS Ranges?
This is normal in a new oven and will disappear in time. To speed the process, set a self-clean cycle for a minimum of 3 hours.
Why is my GE JB735SPSS Ranges smoking excessively during broiling?
Excessive smoking during broiling with your GE Ranges is often because the food is too close to the burner element. Lower the rack position of the food.
Why is there a strong odor coming from my GE JB735SPSS oven?
A strong odor from a GE Ranges oven during its first few uses is normal. This is due to the insulation around the inside of the oven. The odor is temporary and will disappear after several uses or after running a self-clean cycle.
What causes pitting (or indentation) of the cooktop of my GE JB735SPSS Ranges?
Pitting or indentation of the cooktop on your GE Ranges is typically caused by a hot sugar mixture spilling onto the cooktop. Contact a qualified technician for replacement.
Why does the surface unit stop glowing when turned to a lower setting on my GE JB735SPSS Ranges?
If the surface unit stops glowing when turned to a lower setting on your GE Ranges, the unit is still on and hot. This is normal.
What to do if GE Ranges surface units do not work properly?
If the surface units on your GE Ranges aren't working properly, first check if a fuse in your home has blown or the circuit breaker has tripped, and replace the fuse or reset the circuit breaker if needed. Also, make sure the cooktop controls are correctly set for the surface unit you are using.
What to do if my GE JB735SPSS Ranges clock and timer do not work?
If the clock and timer on your GE Ranges are not working, start by checking the fuse or circuit breaker in your home and replace it or reset it if needed. Ensure the range is fully plugged into a properly grounded outlet. Finally, verify that the oven controls are correctly set, referring to the "Oven controls" section for assistance.
Essential safety guidelines for appliance use, installation, and maintenance.
Specific safety precautions for operating the cooktop surface units.
Safety procedures for using the oven, including self-cleaning.
How to use and control surface heating elements and the warming zone.
Function of control buttons and various cooking modes.
Advanced oven features like temperature adjustment, timers, and WiFi connectivity.
Operating the oven in Sabbath mode for religious observance.
Guidelines for cleaning the external surfaces of the range.
Methods for cleaning the oven interior, including steam and self-clean.
Instructions for cleaning and maintaining the glass cooktop surface.
Procedures for replacing the oven light and handling the oven door.
A comprehensive guide to diagnosing and resolving common range issues.
General| Number of Burners | 5 |
|---|---|
| Oven Capacity | 5.3 cu. ft. |
| Convection | Yes |
| Self-Cleaning | Yes |
| Color | Stainless Steel |
| Type | Freestanding |
| Cooktop Surface | Smooth Surface |
| Warranty | 1-Year Limited Warranty |
To Next Page
