GE JBP24 Use And Care & Installation Guide

.
OWN CONTROL,CLOCKAm TMER
Not all features are on all models
u
The oven controls serve several purposes. Follow the directions for the
controls that apply to your model.
AutomaticClock
ToSet the Clock
The clock must be set for the automatic oven timing
n
1. Press the CLOCK pad.
functions to work properly. The time of day cannot be
cLocK 2. Press the HOUR and MIN. pads to ;et
changedduring a Timed Bakingor Self-Cleaningcycle.
the time of day.
Timer
ToSet the Timer
The timer is a minute timer only.
n
1. Press the TIMER
The timer does not control oven
fiT;~$;
ON/OFF pad.
operations. The maximum setting
lAJ
on the timer is 11 hours and 59
2. Press the HOUR and MIN. pads
minutes.
until the amount of time you
want shows in the display. The
timer will start automatically
within a few seconds of
releasing the pad.
ToResettheTimer
If the display is still showing the
time remaining, you may change it
by pressing the HOUR and MIN.
pads until the time you want
appears in the display.
If the remaining time is not in the
display, recall the remaining time
by pressing the TIMER ON/OFF
pad and then pressing the HOUR
and MIN. pads until the new time
you want shows on the display.
ToCancelthe Timer
End of CycleTones
(on some models)
I
To cancel the timer, the remaining time must be in
the display.To recall the time remaining, press the
TIMER ON/OFF pad once. To cancel the timer press
the TIMER ON/OFF pad again.
PowerOutige
On some models, after a power outage the oven will
automatically resume its setting once the power is
restored.
For models with a CLOCK pad, when the power is
restored the display will flash the time of day until a
pad is pressed or the knob is turned. Reset the clock to
the correct time of day.
If the oven was in operation when the power outage
occurred, the Oven Temperature knob must be turned
back to OFF. Then reset the knob to the way it was
before the power outage.
If your model has a COOK TIME ON/OFF pad
and your oven was set for timed baking or roasting
when the power outage occurred, the clock and all
programmed functions must be reset. To reset them,
first turn the Oven Temperature knob back to OFF,
reset the clock, functions and knob back to the way
they were before the power outage.
The end of cycle tone can be cleared by pressing the
TIMER ON/OFF pad or, on some models, by pressing
the COOK TIME ON/OFF pad depending on which
function you are using.
OvenTemperatureKnob
The oven temperature
knob maintains the
OVENON O OFF ~ PREHEATED
temperature you set
from WARM (170°F.)
to BROIL (550°F.).
It also has an OFF ‘:;:m:
and an AUTO SELF
“w”
CLEAN setting.
Appearance may vary,
The PREHEATED light glows when the oven
reaches your selected temperature.
The OVEN ON light will glow any time the Oven
Temperature knob is not in the OFF position and is
set on a temperature or a function.
11

GE JBP24 Specifications

General

Brand	GE
Model	JBP24
Category	Ranges
Language	English