What causes control signals after entering cooking time or start time on my GE Hob?
Control signals after entering cooking time or start time on your GE Hob indicate that you forgot to enter a bake temperature or cleaning time. Touch the Bake pad and desired temperature or the Self Clean pad and desired clean time.
What to do if my GE Hob oven does not work?
If your GE Hob oven isn't working, start by checking if a fuse in your home has blown or if the circuit breaker has tripped. Replace the fuse or reset the circuit breaker if necessary. Also, make sure that the oven is not in Sabbath Mode. See the Special Features section.
Why is my GE Hob oven will not self-clean?
If your GE Hob oven will not self-clean, the temperature may be too high to set a self-clean operation. Allow the oven to cool and reset the controls.
What to do if my GE Hob has power outage, clock flashes?
If you experience a power outage and the clock flashes on your GE Hob, reset the clock. If the oven was in use, you must reset it by pressing the Cancel/Off pad, setting the clock, and resetting any cooking function.
Why is there a strong odor coming from my GE Hob?
A strong odor from your GE Hob during the first few uses is normal due to the insulation around the inside of the oven. This is temporary and will go away after several uses or a self-clean cycle.
What to do if there is water remaining on oven floor after Steam Clean cycle of my GE Hob?
If there is water remaining on the oven floor of your GE Hob after the Steam Clean cycle, remove any remaining water with a dry cloth or sponge. This is normal.
Why does my new GE Hob oven doesn't cook like my old one?
Your new GE Hob oven has a different cooking system from your old oven and therefore may cook differently than your old oven. For the first few uses, follow your recipe times and temperatures carefully. If you still think your new oven is too hot or too cold, you can adjust the temperature yourself by following the steps in Special Features to meet your specific cooking preference. This adjustment affects Bake and Convection Bake temperatures; it will not affect Convection Roast, Broil or Clean.
Why is my GE Hob oven racks are difficult to slide?
If the shiny, silver-colored racks in your GE Hob oven are difficult to slide, it may be because they were cleaned in a self-clean cycle. Apply a small amount of vegetable oil to a paper towel and wipe with Pam® or other lubricant sprays.
How to fix scratches on cooktop glass surface of my GE Hob?
Scratches on your GE Hob cooktop glass surface are not removable. Tiny scratches will become less visible in time as a result of cleaning. To avoid scratches, use the recommended cleaning procedures. Make sure bottoms of cookware are clean before use, and use cookware with smooth bottoms.
Why is my GE Hob food not baking properly?
If food isn't baking properly in your GE Hob, several factors could be the cause. It could be that the oven controls are improperly set, so check the Cooking Modes section. Other potential issues: the rack position is incorrect or not level (see the Cooking Modes section and Cooking Guide), incorrect cookware or cookware of improper size is being used (see the Cookware section), the oven temperature needs adjustment (see the Special Features section), or you made an ingredient substitution that changed the recipe outcome.
Essential safety measure to prevent range tipping and ensure stability.
Broad safety precautions for appliance use, covering general operation and hazards.
Safety rules for cooktops, ovens, and warming/lower drawers.
Understanding oven controls, setting temperatures, broiling, and pan placement for baking.
Timed cooking, probe use, thermostat adjustment, convection, and special features like Sabbath mode.
Details of the GE Electric Range warranty coverage, limitations, and claims.
General| Fuel Type | Electric |
|---|---|
| Oven Capacity | 5.3 cu. ft. |
| Self-Cleaning | Yes |
| Type | Freestanding |
| Cooktop Surface | Smooth Surface |
| Width | 30 inches |
To Next Page
