Usingthe convectionoven.(onsome models)
Forbestresultswhenroastinglarge
turkeysandroasts,we recommend
usflTgtheprobeincludedin the
COITVectioI7 oveR.
(DQQdDdZ)
@
How to Set the Oven for Convection Roasting when Using the Probe
(onsome models)
The display will flash PROBE and the oven
control Mll signal if the probe is inserted
into the outlet, and you have not set
a probe temperatm'e and touched the
STARTpad.
[] Place the shelf in the shelf l)°siti°n
(A). Insert the probe completel)
into the toed.
[] Plug the probe into the outlet in the
oxen. Make sure it is pushed all the
wax in. Close the oxen (lore:
[] Touch the CONVECTION ROAST pad.
[] Touch the number pads to set the
desired oxen temperature.
[] Touch the PROBE pad.
[] Touch the immber pads to set the
desired internal t0od temperature.
To change the oven temi)eratm'e dtwing
the Convection Roast wcle, touch the
CONVECtiON ROAST pad and then touch
the number pads to set the new desired
temperatm'e.
[] Touch the STARTpad.
_,_]_en the oven starts to heat, the word
1.0 will be in the display.
_Mter the internal temperature of the fi)od
reaches ] O0°g the changing internal
temperatm'e will be shown in the display:
] X._hen the internal temperatm'e of the
t0od reaches the number you haxe
set, the probe and the oven mrn off
and the oven control signals. To stop
the signal, touch the CLEAR/OFFpad.
Use hot pads to remove the probe
from the t0od. Do not use tongs to
pull on it--they might damage it.
CAUtiON:Topreventpossiblebums,donot
unplugtheprobefromtheovenoutletuntiltheoven
hascoo/ecLDonot storetheprobelb theoven.
NOTE"
;;Ji::If theprobeIsremovedfromthefoodbeforathe
finaltemperatureisreached,a tonewill sound
andthedisplaywill flashuntil theprobeis
removedfromtheoven.
!i>Youwill heara fanwhilecooklbgwith this
feature.Thefanwill stopwhenthedooris
openedbuttheheatwill notturnoff.
!i> Youcan usethe tlYnereven though youcannot
usetimed ovenoperations while usingthe probe.
20
To Next Page
Loading...
