J
jeffrey23Aug 29, 2025
Why do the clock and timer not work on my GE Ranges?
- JJordan MarquezAug 29, 2025
If the clock and timer on your GE Ranges do not work, replace the fuse or reset the circuit breaker.
To Next PageTo Next PageWhy do the clock and timer not work on my GE Ranges?
If the clock and timer on your GE Ranges do not work, replace the fuse or reset the circuit breaker.
How to fix GE Ranges burners that do not light?
If your GE Ranges burners do not light, ensure the electrical plug is properly inserted into a grounded outlet. Also, check if a fuse in your home may be blown or the circuit breaker tripped, and replace the fuse or reset the circuit breaker. Additionally, make sure the gas supply is connected and turned on. Ensure burner parts are correctly replaced, and remove the burners and clean them if the burner slots near the electrode or the round lighter port on the oval burner are clogged. Lightly polish flat tip of electrode with nail file or sandpaper until shiny if there is food residue on electrode.
What to do if my GE JGBS10 has excessive smoking during broiling?
If you experience excessive smoking while broiling in your GE Ranges, lower the rack position of the food.
How to fix a GE JGBS10 Ranges drawer that doesn't slide smoothly?
If the drawer on your GE Ranges does not slide smoothly or drags, fully extend the drawer and push it all the way in to ensure it's aligned. Reduce weight or redistribute contents if the drawer is overloaded or the load is unbalanced.
Why does my GE Ranges oven door glass look tinted?
This is normal for new GE Ranges. The inner oven glass has a heat barrier to reflect heat back into the oven, which may cause a tinted or rainbow color under certain light or angles.
Why is my GE Ranges oven not clean after the self-clean cycle?
If your GE Ranges oven is not clean after a clean cycle, it could be due to improperly set oven controls or a heavily soiled oven. Clean up heavy spillovers before starting the clean cycle. Heavily soiled ovens may need to self-clean again.
Why do my GE JGBS10 top burners do not burn evenly?
Uneven burning of your GE Ranges top burners may be due to improper burner assembly. Ensure the burner caps are seated correctly. Also, burner slots on the side of the burner may be clogged, so remove the burners for cleaning.
What to do if my GE Ranges clock and timer do not work?
If the clock and timer on your GE Ranges aren't working, a fuse in your home may be blown, or the circuit breaker tripped. Replace the fuse or reset the circuit breaker.
What to do if my GE JGBS10 oven will not self-clean?
If your GE Ranges oven will not self-clean, it could be due to a couple of reasons. The temperature may be too high, so allow the oven to cool and reset the controls. Also, the oven controls may be improperly set.
What to do if my GE Ranges oven appears not to work?
If your GE Ranges oven appears not to work, there are a couple of things you can check. First, a fuse in your home may be blown, or the circuit breaker tripped, so replace the fuse or reset the circuit breaker. Also, make sure the oven controls are properly set. If this does not solve the issue, verify that the oven is not in Sabbath Mode.
Covers critical warnings, gas leaks, and fire prevention measures.
Details on installing the anti-tip device to prevent range tipping.
Covers grounding, qualified installers, and service technician requirements.
Covers traffic, packaging, flammable materials, and child safety.
Focuses on grease fires, oven fires, vents, and glass door safety.
Guidelines for oven storage, foil use, and handling hot air.
Advises on internal temperatures for meat and poultry for food safety.
Covers pan size, flame control, pot holders, and cookware types.
Details on safe frying techniques and wok usage hazards.
Instructions for using, cleaning, and maintaining the griddle.
Procedures for detecting gas leaks and preventing fires.
Visual guide identifying numbered parts of the range.
Explains the purpose and location of each labeled part.
How to light burners, use controls, and select flame size.
Guidelines before lighting and after using surface burners.
Recommends cookware types for gas ranges and their properties.
Instructions for lighting surface burners during a power failure.
Steps for inserting and preheating the griddle for cooking.
A table detailing cooking times for various foods on the griddle.
Step-by-step instructions for setting the clock on the range.
Explains the function and operation of the main oven control.
Guidelines for oven shelf positioning and vent importance.
Information on operating during power outages and using the oven light.
How to set the oven, preheat, and place baking pans.
Guidance on cleaning the oven bottom and using aluminum foil.
Steps for broiling, shelf positions, and keeping doors closed.
Specific instructions for lining the broiler pan with foil.
A detailed guide with cooking times for various foods.
Tips on preparing meats, including slashing fat and marinating.
Step-by-step guide to adjusting the oven thermostat.
Explains how margarine type affects baking results.
Detailed instructions for cleaning the griddle after use.
Warnings regarding grease accumulation and cleaning spills.
Instructions on removing burner parts and safety warnings.
Procedures for cleaning burner caps and heads.
Correctly placing burner heads and caps after cleaning.
How to clean burner grates, including ammonia soak method.
Guidelines for cleaning the range's cooktop surface.
Instructions for cleaning the oven door and bottom interior.
How to clean the broiler pan and grid after use.
Instructions for cleaning oven shelves, kick panel, and broiler compartment.
Steps for safely replacing the oven light bulb.
Cleaning procedures for oven vents, control panel, and interior.
Warnings and precautions for using spray-on oven cleaners.
Covers specific state regulations and initial preparation steps.
Important notes for installers and consumers regarding the manual.
Lists necessary tools, materials, and safety advice.
Mentions the anti-tip bracket kit provided with the range.
Covers warnings, connectors, grounding, and floor/wall covering suitability.
Specifies minimum clearances for cabinets and ventilation hoods.
Visual guide showing required dimensions for range installation.
Instructions for installing the anti-tip device and choosing the range's location.
Locating identification numbers and preparing the range.
Specifies correct pressure for natural and LP gas.
Detailed steps for safely connecting the gas line.
Illustration showing placement for gas and electrical hookups.
Illustrates connecting the range with a flexible gas connector.
Illustrates connecting the range with rigid gas piping.
Details voltage, circuit needs, and extension cord usage.
Proper grounding techniques and temporary adapter use.
Instructions for assembling burners and disconnecting power.
Conformance with mobile home installation safety standards.
Procedure to check surface burner ignition and flame quality.
How to verify the oven burner ignites and operates correctly.
How to adjust air shutters for optimal burner flame.
Step-by-step instructions to ensure the range is level.
Detailed steps for securing the range to the wall.
Guidance on converting the range from natural gas to LP gas.
Common problems with top burners and their solutions.
Troubleshooting for oven baking and clock operation errors.
Diagnosing issues with broiling and oven temperature regulation.
Solutions for oven light, sounds, window effects, and odors.
Information on comprehensive appliance protection plans.
Steps to register your appliance for service and updates.
Details on what the warranty covers and its limitations.
Accessing help via website, service scheduling, and contact numbers.
Information on extended warranties, parts, and product registration.
General
