GE LOGIQ e R6 Series - Monitor Adjustments

GE
Direction 5370626-100, Revision 18 LOGIQ e/LOGIQ e Vet/LOGIQ i/Vivid e Basic Service Manual
6-2 Section 6-2 - Monitor Adjustments
Section 6-2
Monitor Adjustments
6-2-1 Adjustments Procedures
To adjust the brightness and volume:
1.) Press Ctrl
+ brightness key together (up/down), located on the keyboard.
1.) Press Ctrl
+ volume key together (left/right), located on the keyboard.
Figure 6-1 LCD Monitor