GE Marquette Responder 3000

Technical Specifications
227 490 02-C Marquette Responder® 3000 83
Power supply
Battery
power supply from 1 or 2 exchangeable NiCd
batteries
•
rated voltage 12 V
•
rated capacity 2.0 Ah
•
battery charging in device
•
max. charge time of a depleted battery 4 hours
•
operating time with one fully charged battery
approx. 60 shocks of 360 Joules each (into 50
Ohms) or 1.4 hours of monitoring (1 h if pace-
maker, etCO
2
and SpO
2
measuring system are
used)
Line Power (optional)
•
100 V to 240 V
±
10 % (47 Hz to 63 Hz)
•
power consumption at 230 V:
−
during defibrillator charging 240 VA
−
during monitor operation 40 VA
−
during battery charging 25 VA
•
max. charge time of a depleted battery 4 hours
•
intrahospital use (IPX 1)
Operation in Vehicle Mounting Unit, Power
from 12 V DC Ambulance Supply System:
•
11.5 to 18 V
•
power consumption
−
during defibrillator charging 130 W
−
during monitor operation 27 W
−
during battery charging 14 W
Operational readiness
•
4 seconds, incl. automatic self-test
Operating position
any, horizontal with AC power adapter
Type of Protection
protected against splashing water; Marquette
Responder: IPX 4 (batteries inserted, cables
connected)
AC power adapter: IPX 1
Environment
Operation
operation under the following conditions consid-
ered to be normal:
•
temperature between 0 and +45
°
C
•
relative humidity between 5 % and 95 %, no
condensation
•
atmospheric pressure between 700 and
1060 hPa
•
vibration acc. to MIL 810E Cat.10 and
prEN 1789
Transport and storage
•
temperature between -25 and +70
°
C
•
relative humidity between 10 % and 95 %, no
condensation
•
atmospheric pressure between 500 and
1060 hPa (with etCO
2
adapter cable: 700 and
1060 hPa)
Dimensions
•
width 307 mm
•
height 202 mm
•
depth 412 mm (without AC power
adapter)
476 mm (with AC power adapter)
Weight
•
with one battery approx. 8 kg (w/o. AC power
adapter)