GE MULTILIN 269 MOTOR MANAGEMENT RELAY Series

Setpoints, Pg. 2 3 SETUP AND USE
Page Line Information Line Setpoint Range and Units Manual Ref.
3-23
2 20
RTD #7 TRIP LEVELRTD #7 TRIP LEVEL
= XXX DEGREES C= XXX DEGREES C
0-200 degrees C or OFF
(increments of 1)
(32-392 degrees F)
3.17
21
RTD #8 ALARM LEVELRTD #8 ALARM LEVEL
= XXX DEGREES C= XXX DEGREES C
0-200 degrees C or OFF
(increments of 1)
(32-392 degrees F)
3.17
22
RTD #8 TRIP LEVELRTD #8 TRIP LEVEL
= XXX DEGREES C= XXX DEGREES C
0-200 degrees C or OFF
(increments of 1)
(32-392 degrees F)
3.17
23
END OF PAGE TWOEND OF PAGE TWO
SETPOINT VALUESSETPOINT VALUES