3-36 F650 Digital Bay Controller GEK-113000T
3.2 HUMAN MACHINE INTERFACE (HMI) 3 HUMAN INTERFACES. SETTINGS & ACTUAL VALUES
3
3.2.5.3 ACTUAL VALUES
The Actual Values menu option in HMI concentrates and displays all the status of protection, control elements, metering,
counters information, oscillography, events, fault locator, etc.
Table 3–29: GENERAL OVERVIEW OF ACTUAL VALUES MAIN MENU:
Front Panel >
LEDs
Status >
Operation Bits
Breaker
Protection >
Protection Blocks
Phase Current
Neutral Current
Ground Current
Sens. Ground Current
Neg. Seq. Current
Thermal Model
Voltage
Power
Control Elements >
Frequency
Synchrocheck
Autoreclose
Breaker Failure
(enhanced models only)
VT Fuse Failure
Broken Conductor
Setting Groups
Locked Rotor
Pulse Counters
Analog Comparators
Load Encroachment
Switchgear Status >
Switchgear 1
Switchgear...
Switchgear 16
Calibration
Flex Curves
System Info
Records Status >
Fault Reports
Control Events
Oscillography
Data logger
Demand
Energy
Breaker Maintenan.
SNTP-IRIG_B
To Next Page
Loading...
