CHAPTER 6: ACCESS CONSIDERATIONS ACCESS CONSIDERATIONS
MULTILINK ML2400 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL 6–7
Z (Optional step) Add any specific MAC addresses, if needed, to allow
designated devices to access the network (use the
add
mac=00:c1:00:7f:ec:00 port=11,15
command).
Z Disable access to the network for unauthorized devices (Use
action port=11 <diable|drop> depending on whether the
port should be disabled or the packed dropped. Follow that with a
show port-security command to verify the setting).
Z (Optional step) Set the notification to notify the management
station on security breach attempts (use the command
signal
port
to make a log entry or send a trap).
To Next Page
Loading...
