GE MULTILINK ML2400 - Gigabit (1000 Mbps) Modules

2–6 MULTILINK ML2400 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
PRODUCT DESCRIPTION CHAPTER 2: PRODUCT DESCRIPTION
2.2.4 Gigabit (1000 Mbps) Modules
The 1000 Mb Gigabit fiber-port modules on the ML2400 are normally set (factory default)
to operate in AUTO mode for best fiber distance and performance. The 1000 Mbps SC
fiber-optic module on the Gigabit-SX and Gigabit-LX transceivers are compatible with the
IEEE 802.3z Gigabit standards.
FIGURE 2–4: Gigabit module in fourth port
754730A1.CDR