CHAPTER 8: ACCESS USING TACACS+ ACCESS USING TACACS+
MULTILINK ML2400 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL 8–5
Example 8-1: Configuring TACACS+:
ML2400#
show tacplus servers
ID TACACS+ Server Port Encrypt Key
=======================================
1 10.21.1.170 49 Enabled secret
2-- ---- --
3-- ---- --
4-- ---- --
5-- ---- --
ML2400# user
ML2400(user)##
show tacplus status
TACACS+ Status: Disabled
ML2400(user)## tacplus enable
TACACS+ Tunneling is enabled.
ML2400(user)## tacserver add id=2 ip=10.21.1.123 encrypt=enable k
TACACS+ server is added.
ML2400(user)## show tacplus servers
ID TACACS+ Server Port Encrypt Key
=======================================
1 10.21.1.170 49 Enabled secret
2 10.21.1.123 49 Enabled some
3-- ---- --
4-- ---- --
5-- ---- --
ML2400(user)## tacserver delete id=2
TACACS+ server is deleted.
ML2400(user)## show tacplus servers
ID TACACS+ Server Port Encrypt Key
=======================================
1 10.21.1.170 49 Enabled secret
2-- ---- --
3-- ---- --
4-- ---- --
5-- ---- --
ML2400(user)## tacplus disable
TACACS+ is disabled.
ML2400(user)##
To Next Page
Loading...
