GE MULTILINK ML2400 - Page 184

11–8 MULTILINK ML2400 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
VLAN REGISTRATION OVER GARP CHAPTER 11: VLAN REGISTRATION OVER GARP
Example 11-2: Configuring GVRP
ML2400#
gvrp
ML2400(gvrp)#
show gvrp
GVRP Status : Enabled
ML2400(gvrp)## gvrp disable
GVRP is now disabled
ML2400(gvrp)## gvrp enable
GVRP enabled
ML2400(gvrp)## show-vlan
=================================================
VLAN ID | NAME | VLAN | STATUS
=================================================
1 | Default VLAN | Static | Active
2 | Blue | Static | Active
10 | dyn10 | Dynamic | Active
ML2400(gvrp)## static vlan=10
ML2400(gvrp)##
show-vlan
=================================================
VLAN ID | NAME | VLAN | STATUS
=================================================
1 | Default VLAN | Static | Active
2 | Blue | Static | Active
10 | dyn10 | Static | Active
ML2400(gvrp)## set-forbid vlan=2 forbid=11-15
ML2400(gvrp)##
show-forbid
============================================
VLAN ID | FORBIDDEN PORTS
============================================
1 | None
2 | 11, 12, 13, 14, 15
ML2400(gvrp)##