NX-8 Control
29
LOCATION 59 - TROUBLE COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (8 segments, numerical
data )
Location 59 contains the event code for a zone "Trouble" for a 4+2 format. The digit programmed in this location will
be sent as the tens digit. The zone ID will always be reported as the zone number (i.e. 9 for zone 29). Any
segment left as "0" will follow the event code for partition 1.
Segment 1 - Partition #1, "Trouble Code".
Segment 2 - Partition #2, "Trouble Code".
Segment 3 - Partition #3, "Trouble Code".
Segment 4 - Partition #4, "Trouble Code".
Segment 5 - Partition #5, "Trouble Code".
Segment 6 - Partition #6, "Trouble Code".
Segment 7 - Partition #7, "Trouble Code".
Segment 8 - Partition #8, "Trouble Code".
LOCATION 60 - SENSOR LOW BATTERY COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY
(8 segments, numerical data)
Location 60 contains the event code for a zone "Sensor Low Battery" for a 4+2 format. The digit programmed in this
location will be sent as the tens digit.. The zone ID will always be reported as the zone number (i.e. 9 for zone 29).
Any segment left as "0" will follow the Segment 1 selection.
Segment 1 - Partition #1, "Sensor Low Battery Code".
Segment 2 - Partition #2, "Sensor Low Battery Code".
Segment 3 - Partition #3, "Sensor Low Battery Code".
Segment 4 - Partition #4, "Sensor Low Battery Code".
Segment 5 - Partition #5, "Sensor Low Battery Code".
Segment 6 - Partition #6, "Sensor Low Battery Code".
Segment 7 - Partition #7, "Sensor Low Battery Code".
Segment 8 - Partition #8, "Sensor Low Battery Code".
LOCATION 61- SENSOR MISSING COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (8 segments,
numerical data)
Location 61 contains the event code for a zone "Sensor Missing" for a 4+2 format. The digit programmed in this
location will be sent as the tens digit.. The zone ID will always be reported as the zone number (i.e. 9 for zone 29).
Any segment left as "0" will follow the Segment 1 selection.
Segment 1 - Partition #1, "Sensor Missing Code".
Segment 2 - Partition #2, "Sensor Missing Code".
Segment 3 - Partition #3, "Sensor Missing Code".
Segment 4 - Partition #4, "Sensor Missing Code".
Segment 5 - Partition #5, "Sensor Missing Code".
Segment 6 - Partition #6, "Sensor Missing Code".
Segment 7 - Partition #7, "Sensor Missing Code".
Segment 8 - Partition #8, "Sensor Missing Code".
LOCATION 62 - DURESS COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (2 segments, numerical
data)
Location 62 contains the tens and ones digits that will be sent for a 4+2 format if the Duress code is enabled in
location 44. Segment 1 contains the tens digit, segment 2 contains the ones digit.
LOCATION 63 - KEYPAD AUXILIARY 1 COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (2 segments,
numerical data )
Location 63 contains the tens and ones digits that will be sent for a 4+2 format if the keypad "Auxiliary 1" (FIRE) is
enabled in the partition feature selection . Segment 1 contains the tens digit, segment 2 contains the ones digit.
LOCATION 64 - KEYPAD AUXILIARY 2 COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (2 segments,
numerical data)
Location 64 contains the tens and ones digits that will be sent for a 4+2 format if the keypad "Auxiliary 2" (MEDICAL)
is enabled in the partition feature selection. Segment 1 contains the tens digit, segment 2 contains the ones digit.
To Next Page
Loading...
