•
Loosen the two screws and remove and discard
the sheet metal strap covering the 5-pin connector
on the cooktop bottom Save the screws for
reinstallation later
•
Connect the 5-pin plug on the blower
assembly
to the matching 5-pin receptacle on the bottom of
the cooktop
16
THE COOKTOP
28
•
Fold all wires into the electrical enclosure Secure
the enclosure with the screws removed earlier,
making sure that no wires are trapped
•
Plug the cooktop cord set into a suitable electrical
outlet See step 17
16
Remove
screws and
discard strap
5-pin
connectors
Electrical
enclosure
Flexible
conduit
5-pin
connectors
To Next Page
Loading...
