Viewing Scans
With the phased array probe coupled to a test piece, there are various
ways to view the resulting scans and measured data.
Press to choose between A-Scan, Sector (or Linear) Scan, or both A
and Sector (or Linear Scan).
Press to access the DISPLAY menu and determine the measured
results displayed as follows :
Link the A and Sector (or Linear) Scans Vertical Size – • VIEW
then set ASCAN MODE to BUD (Beam Ultrasonic Depth)
Display Leg Lines – • DISPLAY then BACKGRND, COLOR LEG on.
Control the On-Screen Beam Cursor - press • two times then
Right Knob.
To Next Page
Loading...
