GE Phasor XS - Probe and Wedge Configuration; Probe and Wedge Parameter Input

6
6
7
Conguring for a Probe and Wedge
Access the probe and wedge settings by pressing to activate the
PROBE menu. Then activate the PRB GEO submenu. Press next to
FREQUENCY, or NUMBER of ELEMENT, or PITCH to input values printed
on the probe body. Other probe and wedge features are adjusted as
follows:
Probe Part Number – • PROBE then PRB DAT
Probe Serial Number – • PROBE then PRB DAT
Wedge Part Number – • PROBE then WDGE DAT
Wedge Serial Number – • PROBE then WDGE DAT
Wedge Velocity – • PROBE then WDGE GEO