– 53 –
Test Mode Description
t15 Dispenser Test
Verifi es the dispenser motor works and can locate
all 4 dispenser positions.
t16 Bulk Pumps Test Verifi es all the Smart Dispenser Pumps work.
t17 Bulk Sensors Test
Verifi es all the Smart Dispenser Sensors work.
t18 AutoSpin Profi le Tests each spin speed of the washer. Note: No
out-of-balance detection will be performed here,
so the washer will spin up regardless of any out-of-
balance condition in the drum.
t19 Bulk Manual Priming Manually initiates the priming of the Smart
Dispenser pumps.
t20 Bulk Primed Status Checks the control status of the prime status of the
pumps and allows the user to change/reset the
prime status.
To Next Page
Loading...
