6
Clean Pump Filter
Due to the nature of the front-load washer, it is sometimes possible for small
articles to pass to the pump. The washer has a filter to capture lost items so they
are not dumped to the drain.
To retrieve lost items, clean out the pump filter.
1) Using a coin in the notch on the door, open the
access door.
2) Place a shallow pan or dish under the pump
access door and towels on the floor in front of
the washer to protect the floor. It is normal to
catch about a cup of water when the filter is
removed.
3) Turn the pump filter counterclockwise and
remove the filter.
4) Clean the debris from the filter.
5) Replace the filter and turn clockwise to the
marked position.
6) Close the access door.
CONFIDENTIAL AND PROPRIETARY INFORMATION-NOT FOR PUBLIC DISCLOSURE. September 2008
To Next Page
Loading...
Need help?
General