GE PT878 - Changing the Number of Displayed Measurements

July 2003
16 PT878 Quick Start Guide
Changing the Number of Displayed
Measurements
The PT878 can display one to four different measurement
parameters simultaneously. However, sometimes you might wish
to display only one or two parameters. To change the number of
open display windows from within the Site Menu (shown in
Figure 5 on the previous page), use the [
T]or [S] arrow keys to
move to the desired number of views (1 View, 2 Views, etc.)
Press
[ENTER]. The screen displays the desired number of
windows.
To display data in other formats (such as bar or line graphs) or
modify the softkeys, refer to Chapter 5, Displaying and
Configuring Data, in the User’s Manual.